| Question: |
Riding Tips for how to riding well |
| Answer: |
Move the Shifter to correct position on Normal or Multi Position. |
|
|
| Question: |
Riding Tips for how to riding well |
| Answer: |
When you pedal one side only, you should lift your heel (just in time do not use power)same as above when you pass the dead angle. |
|
|
| Question: |
Riding Tips for how to riding well |
| Answer: |
When you ride with Multi motion, try to ride on flat area or not crowded street. |
|
|
| Question: |
Riding Tips for how to riding well |
| Answer: |
When you ride with natural walking (up and down) motion, use the full stroke (160°±5°) as long as you can. If you are skilful to alternate in the middle of full stroke, you will enjoyed the ride with good speed feeling. |
|
|
| Question: |
Riding Tips for how to riding well |
| Answer: |
When you change the pedaling motion correctly and well from Multi Motion to Normal Motion and VS, The shifter has to be set the correct position on Multi or Normal.If Shifter is not set on correct position, the pedal motion will not work smoothly. It will be needed 360° rotation for changed the motion. |
|
|
| Question: |
Riding Tips for how to riding well |
| Answer: |
Although the shifter set on the Multi Positin, when one side is working the Multi Function and the other side is not working Muti Function, reset the shifter on Multi Position for many time. Although Multi Function does not work, then stop the function and adjust the shifter wire and other necessary adjustment. |
|
|
| Question: |
Riding Tips for how to riding well |
| Answer: |
When Shifter is on Multi Position, put your left foot first into left's Toe-Clip firmly, and let your bike to push forward, then put your right foot slowly into Right's Toe-Clip. Just in time, please, put your right food into Toe-Clip from outward to inward, not from backward to forward. |
|
|
| Question: |
Riding Tips for how to riding well |
| Answer: |
When Shifter is on Multi Position and one or both foot go around (360°) and when pass the dead angle (11:00 to 01:00 o'clock), your toe can be departed form the Toe-Clip. Therefore, when you pass the dead angle, you should lift your heel (just in time do not use power) and pass the dead angle or learned how to use the moment of inertia.The motion of 360° is easier when speed is over 12km/h. |
|
|
| Question: |
Riding Tips for how to riding well |
| Answer: |
Due to the motion of Multi Function has to use Toe-Clip, you have to be in proficiency how to use the Toe-Clip well when you take off your foot from the Toe-Clip or take your foot in Toe-Clip. |
|
|
